Sign Posts

The most adaptable option. Perforated square steel posts have holes on all four sides, so signs mount at any height, and each size telescopes into the next for splices and anchor sleeves.

• 1-3/4″, 2″, 2-1/4″, and 2-1/2″ perforated, plus 2-1/2″ and 3″ non-perforated
• 7, 10, 12, and 14 gauge ASTM A653 steel, G90 hot-dip galvanized
• 7/16″ holes on 1″ centers; 2″ EZ-Out™ posts let you knock out holes only where you need them
• 10, 12, 20, and 24-foot lengths
• Mount signs with 5/16″ corner bolts or 3/8″ drive rivets; add Tufnut security nuts where theft is a problem

Anchors set a square post in soil or concrete and make it quick to swap a post after a knockdown. Use a slip base or anchor system when the sign sits in the clear zone.

• Heavy-duty and two-piece sign post anchors
• Slip base anchor system with an 8″ or 10″ triangular base
• Surface mount base anchor for concrete
• Manual drive caps for 2″, 2-1/4″, and 2-1/2″ posts, or power drive caps with a power drive shank for jackhammer installs

The fastest install. U-channel posts drive straight into the ground with no anchor or concrete, which suits street signs, temporary signs, and high-volume installs.

• Heavy-duty 2 lb/ft steel with a tapered end
• Galvanized or green, rib back or smooth profile; custom colors on request
• 3/8″ holes on 1″ centers, in 10′ and 12′ lengths
• Mount signs with cherry mate rivets or two-piece bolts; pull old posts with a JackJaw® post puller

The finished look for street sign posts, parking signs, and downtown corridors.

• Round galvanized steel posts, 2-3/8″ outside diameter
• 13 or 16 gauge, in 10′ or 12′ lengths
• Closure caps fit all 2-3/8″ OD round posts
• Street name signs mount in aluminum castings with set screws, aluminum bolts, or button head bolts